5 Steps to Build DIY Solar Panels

Solar Panels make use of the renewable energy from the sun. Renewable energy is the energy generated from natural resources like sunlight, wind; tides.etc. One can get many benefits from solar energy. Since many are not aware of its benefits it has not been utilized properly. Instead of buying these panels you can do solar panels yourself. This panel can be built easily with simple tools. The tools that are necessary for constructing the solar panels include solar plates, photovoltaic cells, semi conductor block, converter, conductor wires and battery. These components are available in the market at a very low cost. It is easy to assemble these parts to form a Solar Panel.

There are five simple steps which helps you to build Solar panel by yourself very easily and quickly.

Step 1: Join the solar plates and the photovoltaic cells. Photovoltaic cells are cells that produce electricity directly from the sunlight. The solar plates should be kept on top of the photovoltaic cells. Both the ends of the solar plate and photovoltaic cells should be tied firmly with wires.

Step2: Then the semi conductor block is taken and is kept below the two and is tied with plenty of conductor wires.

Step 3: After making sure the plates have been tied properly with cell and semi conductor block, the plate should be kept in a good position with the sun. You must be sure that the sun’s rays falls on the plate. Only if we position the plates properly it will absorb maximum sun’s energy.

Step 4: Next, connect the converter. The converter is used to filter the energy to remove the non-electronic components. The converted energy must have only electrons.

Step 5: Finally we need to connect the battery. The battery absorbs the electrons. The suns power is now converted into electricity. We can use more than ten batteries to increase the storage capacity. This electricity obtained can be used for any electrical appliance.

If we follow these steps you can very easily build an effective solar panel. If there is direct sunlight at your home then it is the best place to build this panel. Before you go in for making the solar panels by yourself you must make sure that there is an appropriate place to keep the panel (Where there is direct sunlight) and all the components that are required to build the panel. After successful conversion of solar energy to electricity, you can teach these steps to other people who are not aware of the benefits of solar energy.